Lighting & Projection Specs

The Freight and Salvage’s lighting system consists of the following

• ETC ColorSource 40 AV Console: 2 DMX Universes
https://www.etcconnect.com/Products/Lighting-Fixtures/ColorSource/Consoles.aspx
• ETC Response Gateway: Ethercon to 4 Port DMX: IP Address: 10.101.50.61

• 13 Rogue R2 Washes: Mode 22
https://www.chauvetprofessional.com/products/rogue-r2-wash/
• 10 Color Block 2: Mode 9
• 2 Color Block PSU-O5B
• 13 ETC Source Four 36°
• 2 ETC Source Four Medium Flood PARs
• 2 ETC Source Four Wide Flood PARs

• 3 L21-20 Male to (3) 20 Amp Female Edison Adapters:
To power the Rogue R2 Washes
1st Electric SR & SL (1 circuit each in use)
3rd Electric SR ( 2 circuits in use)

• Color Block 2 PSU’s plugged into separate Edison Power 1st Elec SR & SL

• 4 Strand S21 Dimmer Strips 6 x 1.2w (1 Spare)

• 2 – 100 AMP 120/208VAC 3 Phase 5 Wire: Hubbell Pin & Sleeve: Touring Power

Freight & Salvage Magic Sheet 2018 (lighting grid)

Screen & Projector

Screen:
Da-Lite 99287 L Tensioned Large Cosmopolitan Electrol
• 108×192″
Projector:
Christie D16WU-HS
• Black 1-DLP
• Solid State WUXGA 
• 1920×1200″
• 15,500lm ANSI
• 91.5lbs
• BoldColor

<< Return to our resource page >>